4WD Ball Joint Service Kit for Dana44
This kit is used with ball joint service kit No. 7249 to remove and install upper and lower ball joints on 1967-current 1/2- and 3/4-ton 4WD vehicles having the Dana44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
$86.48/each
More Information
|
View Full Size
|
|
Master Ball Joint Adapter Set
This set was created specifically to expand the capability of your OTC7249 ball joint service tool set. It includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge, 2 and 4-wheel-drive pickups, vans, and sport utility vehicles, through 1997. Also includes the No. 7917 live center forcing screw plug. Packaged in a convenient carrying case and includes application chart.
$215.99/each
More Information
|
View Full Size
|
|
|
4WD GM Ball Joint Adapter Set
Use this set with your No.7249 ball joint service tool set to service GM's 1996 and newer 4WD 1/2 and 3/4 ton pickups, Suburbans and Yukons/Tahoes. Easily remove or install either aftermarket or original equipment press-fit lower ball joints.
$74.12/each
More Information
|
View Full Size
|
|
Dodge Ram/Jeep Ball Joint Service Adapter Kit
Use with the No. 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints, and the offset ball joints used to change caster/camber. Applications: 1984-newer "downsized" Jeep Wagoneer and 2WD and 4WD Cherokee and Comanche, 1987-newer Jeep Wrangler, 1990-newer Jeep Renegade, 1993-newer Jeep Grand Cherokee, 1994-newer Dodge Ram 1/2-ton 4WD pickup.
$86.79/each
More Information
|
View Full Size
|
|
Ball Joint Service Tool and Master Adapter Set
Removes and replaces ball joints C frame pres alone can be used to remove and replace universal joints Set includes all the reciever tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles through 1997. Also included is the #2030-1 live center forcing screw plug Comes in a blow molded case
$161.72/each
More Information
|
View Full Size
|
|
Ball Joint Remover/Installer Super Set
This set allows for the removal and installation of press-fit ball joints on many GM and Ford light-duty trucks, vans and SUVs through 2003; Dodge light trucks through 1998; Dodge vans, Durango and Dakota through 2003; and Honda Accord, Civic, del Sol, and Prelude through 2001. Combines the popular OTC 7249, 7918 and 7996 ball joint sets into one SUPER set, competitively priced. The OTC designed and produced C-frame tool can be used alone to remove and replace universal joints. Comes complete with an application cross reference and instructions in a blow-molded case.
$311.42/each
More Information
|
View Full Size
|
|
Ball Joint Press with 4WD Adapters
Ball joint service Universal joint service Truck brake anchor pin service Four wheel drive ball joint service Will remove even rusted and corroded parts Includes: C-Frame press, 3 Receiver tubes (2-3/4"I.D.x3"O.D., 2-1/4"I.D.x2-1/2"O.D. and 1-3/4"I.D.x2"O.D.), 1 Installing adapter, 1 Removing adapter, 1 Installing cup, 1 Receiving cup
$82.99/each
More Information
|
View Full Size
|
|
|
Ball Joint Service Tool Set
This set removes and replaces ball joints. The C-frame press alone can also be used to remove and replace universal joints. Includes: C-frame press, receiver tube (3" O.D. x 2-3/4" I.D.), receiver tube (2-1/2" O.D. x 2-1/4" I.D.), receiver tube (2" O.D. x 1-3/4" I.D.), installing adapter, removing adapter, carrying case.
$101.50/each
More Information
|
View Full Size
|
|
| |
|
Page: 1 2 Next >
|
|
|
