 |
|
| Featured Products |
Outer Tie Rod Remover
Works on imports and domestics; front or rear wheel drives; and cast or stamped steel steering knuckles. This one's a must when working on outer tie rods. Its versatility is a big time and money saver. You can apply up to tons of force to this puller to break the tie rod free from the steering knuckle without damaging either. The special design of this puller also helps prevent the jaws from slipping on the steering knuckle when force is applied.
$90.50/each
More Information
|
View Full Size
|
|
Inner Tie Rod Tool
Works on Tie Rods With Inaccessible Flats Many inner tie rod end sockets do not have a complete hex on the full length of the socket. The rounded socket ends prevent access to the wrench flats. This tool utilizes five crows feet, to engage the wrench flats. Long socket slips over tie rod end and connects to the crows foot. The inner tie rod can be removed and installed without removing the rack.
$64.53/each
More Information
|
View Full Size
|
|
Universal Tie Rod End Remover
We've redesigned it for use on imports and many of today's front wheel drive cars. This easy-to-use adapter attaches diretly to the studs - no more adapter to choose! To use, simply insert tool between spindle arm and tie rod, or drag link and steering arm. Tool is universal in applicaton for most car makes.
$50.08/each
More Information
|
View Full Size
|
|
""Prince Tie Rod Cylinder 3000 PSI, 4in. Bore, 24in. Stroke, 1 3/4in. Shaft Si""
""Heavy duty double acting tie rod cyinder is rated for 3000 PSI continuous working pressure. Chrome plated, hardened piston rod has a heavy locknut and heavy duty clamp-on style clevis. Rod is sealed with nylon bearing ring and urethane seals. O-rings have back-up washers. Metal encased wiper. Ductile iron base casting. Three year warranty. U.S.A. Bore: 4in. Stroke: 24in. Closed Pin Center Distance: 34 1/4in. Shaft: 1 3/4in.""
$229.99/each
More Information
|
View Full Size
|
|
""Prince Tie Rod Cylinder 3000 PSI, 5in. Bore, 24in. Stroke, 2in. Shaft Size""
""Heavy duty double acting tie rod cyinder is rated for 3000 PSI continuous working pressure. Chrome plated, hardened piston rod has a heavy locknut and heavy duty clamp-on style clevis. Rod is sealed with nylon bearing ring and urethane seals. O-rings have back-up washers. Metal encased wiper. Ductile iron base casting. Three year warranty. U.S.A. Bore: 5in.Stroke: 24in.Closed Pin Center Distance: 36 1/4in.Shaft: 2in.""
$319.99/each
More Information
|
View Full Size
|
|
|
""Lion Tie Rod Cylinder 2500 PSI --- 2in.Bore, 8in. Stroke, 1 1/8in. Shaft , Model# 20TL08-112 ASAE""
""Built tough for agricultural and industrial applications. Rated for 2500 PSI continuous working pressure and designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision-ground, polished and hard chrome-plated. 8in. stroke cylinders threaded rods accept adjustable stroke controls. 2in. and 2 1/2in. bore cylinders have 3/8in. working ports; 3in., 3 1/2in. and 4in. bore have 1/2in. working ports. ALL have 1in. pin holes. Bore: 2in. Stroke: 8in. Closed Pin Center Distance: 20 1/4in. Shaft: 1 1/8in. Double acting Model# 20TL08-112 ASAE""
$72.99/each
More Information
|
View Full Size
|
|
""Northern Industrial Tie Rod Cylinder 2500PSI, 3in.Bore, 8in. Stroke, 1 1/4 S""
""3in. diameter, 8in. stroke. 1/2in. NPT port. 2500 PSI. 1/4ft. rod diameter. Double acting.""
$59.99/each
More Information
|
View Full Size
|
|
""Northern Industrial Tie Rod Cylinder 2500PSI, 4in.Bore, 24in. Stroke, 1 1/2in. NPT""
""4in. bore, 24in. stroke. 1/2in. NPT port. 2500 PSI. 1 1/2in. rod diameter. Double acting.""
$119.99/each
More Information
|
View Full Size
|
|
| |
| Page: 1 |
|
|
|
|
|
